Tilt or Skylight Adapter for Mobile Air Conditioner – Exhaust Hose Adapter

• Suitable for exhaust hoses withapprox. 149-150 mm external thread
  
• The front part of the adapter is approx. 55mm high. Please check if the window can be tilted far enough. (see photos)
  
• By default, theleft-hand thread versionis supplied
  
• Robust, heat-resistant ABS
  
• manufactured using 3D printing
  
• Detachable and easy to assemble
  
• Side eyelets for optional additional fastening
  

Open the window as wide as it will be
when in operation.

At the intended installation position, measure the
smallest free distance between the window sash and the frame.

Take into account roller shutter boxes, handles, and
other obstacles.

For this standard version, there must be more than approx. 55 mm of space available
at the installation site.

The adapter is designed for exhaust hoses with an external thread of approximately 149–150 mm. The left-hand thread version is supplied as standard.

Measure the outside of the hose over the thread peaks and check the thread direction. The hose must be able to screw directly into the adapter. Similar-looking connections are not automatically compatible. If you are unsure, please send a photo of the connection along with the measured dimensions before purchasing.

Insert the adapter at the measured position between the window sash and frame.

Screw the exhaust hose into the thread without force.

Check that the adapter and hose are firmly and stress-free seated.

Use the side eyelets if necessary for additional securing with a suitable cord or cable ties.

• 1x window adapter

Not included:exhaust hose, air conditioner, and mounting material.

The adapter is 3D printed in Germany from robust and heat-resistant ABS. Visible layer lines and slight surface variations are due to the manufacturing process and do not constitute a defect. This is a compatible accessory and not an original product from the manufacturer of your air conditioner.

• Before assembly, check that the window, frame, and adapter are undamaged.
  
• Tighten adjustment screws only hand-tight. Overtightening can damage the window frame, wall, or adapter.
  
• The contact surfaces must be secure and, if possible, in full contact.
  
• Depending on the surface, additional protective pads may be useful to avoid pressure marks.
  
• If necessary, the adapter must be additionally secured using the side eyelets.
  
• Accessory – not an original product from an appliance manufacturer.
  
• Visible layer lines are due to manufacturing technology and are typical for 3D printing. They do not constitute a defect.
  
• For better sealing, additional sealing tape or foam can be used depending on the application.
  
• Please check before use whether the adapter is suitable for your window and your air conditioner.