Hose doesn't fit? Custom-made retrofit adapter

• Cost-effective retrofit solution for an ill-fitting hose

• Existing Partalarm window adapter can be reused

• Individually selectable outer diameter for the hose mount

• Suitable for exhaust hoses with deviating inner diameters

• Also suitable for multiple hoses of different sizes

• Simple assembly by screwing on

• Smooth mount for sliding on and securing the hose

• Custom manufacturing based on customer specifications

• Manufacturing tolerance: ±0.5 mm

• Made in Germany using 3D printing technology

Measure the inner diameter of your exhaust hose at several points. If possible, use calipers for this rather than just a ruler or tape measure.

Next, subtract the required clearance so that the hose can be slid over the connection. How much clearance is needed depends on the flexibility, wall thickness, and design of your hose.

Example:

Measured inner diameter: 130.0 mm
Required clearance: 1.0 mm
Order dimension to be entered: 129.0 mm

The dimension entered when ordering corresponds to the desired outer diameter of the retrofit adapter. There is no automatic size adjustment.

The hose must be able to be pushed over the smooth connection side of the retrofit adapter. Therefore, measure the actual inner diameter of your hose.

The size specification "150 mm" for exhaust hoses is often only a nominal dimension. The actual measured diameter may deviate from this.

When ordering, take into account the necessary clearance for sliding it on as well as the manufacturing tolerance of ±0.5 mm. Due to different hose materials and designs, the correct size cannot be determined solely by the model name of your air conditioning unit.

1. Screw the retrofit adapter onto the existing connection of your Partalarm window adapter.
2. Slide your exhaust hose over the custom-made, smooth connection side.
3. Secure the hose with a suitable hose clamp, cable tie, or heat-resistant tape.
4. Before use, check that the adapter is screwed on tightly and the hose is securely fastened.

1 × custom-made hose adapter

The pictured window adapter, exhaust hose, hose clamp, cable ties, adhesive tape, air conditioning unit and other accessories are not included.

The adapter is individually manufactured in Germany using a 3D printing process according to your specified dimensions. Slightly visible layer lines and minor visual deviations are inherent to the process and do not constitute a defect.

The specified diameter is produced with a manufacturing tolerance of ±0.5 mm.

• This item is intended exclusively as an addition to an already existing, compatible Partalarm window adapter.

• Before ordering, please check whether your existing Partalarm window adapter has the appropriate screw connection.

• The requested dimension entered corresponds to the outer diameter of the manufactured hose mount.

• The necessary clearance for sliding on the hose must be taken into account when ordering.

• The adapter is manufactured according to your specified dimensions with a manufacturing tolerance of ±0.5 mm.

• Different hoses can vary even with identical nominal sizes.

• A hose clamp or other fastening device is not included in the scope of delivery.

This adapter is custom-made according to your specifications. According to § 312g Abs. 2 Nr. 1 BGB, there is no right of withdrawal for goods manufactured according to customer specifications.

Therefore, please check your measurements carefully before completing the order. If the adapter is manufactured within the specified production tolerance of ±0.5 mm according to your order, a connection that does not fit due to the chosen size does not constitute a product defect.

Your statutory warranty rights for faulty manufacturing remain unaffected.